Canned motor pump is a kind of sealless pumps. Canned Motor Pump is a centrifugal pump with hermetically sealed electric motor mounted on single shaft thus eliminating the requirement of mechanical seal or other sealing device. Entire rotating assembly is immersed in the liquid, and motor stator and rotor are isolated from the pumped liquid with corrosion resistant, non-magnetic liner and sleeve. A part of the pumped liquid is by-passed through the motor, for cooling of motor and lubricating the bearing.
Canned motor pumps are characterized by their compact and integrated design, with the motor and pump forming a single unit with the rotor and impeller fitted on to a common shaft. The rotor is guided by two slide bearings and the drive motor stator is separated from the rotor using a cylindrical metal can. The rotor compartment, together with the hydraulic section of the pump, is filled with the pumped medium during operation. The heat loss from the motor is carried off by a partial flow between the motor and stator, and the flow also lubricates both slide bearings in the rotor compartment. The can, which is a hermetically sealed component, and the motor casing offer primary and secondary containment, respectively. It is this double containment design, together with the compactness and low noise level, and differentiates the canned motor pump from the magnetically coupled pump. The design makes canned motor pump 100% leak-free. Even in the unlikely event of a stator lime rupturing there is no leakage to the atmosphere. These factors make the canned motor pump ideally suited to the safe handling of hazardous and volatile organic compounds, particularly where high temperatures and high working pressures are encountered.

The canned motor pump industry is highly concentrated, which is due to the high barriers, including technical barriers and supply chain barriers. Also, since the gross profit in pump industry is quite easy to calculate, manufacturers found it hard to lift price unless product quality has been lift to a large extent. The major manufacturers in this industry are Teikoku, Nikkiso, Kirloskar Brothers, HERMETIC-Pumpen, Dynamic Pumps, OPTIMEX, Shinhoo, Zhejiang Dayuan, Shanghai East Pump, Dalian Huanyou, Chemmp, Shigme, Hayward Tyler, Curtiss-Wright, Harbin Electric Corporation.
Standard basic pumps are the largest type of canned motor pumps, which accounted for 36.79% in 2015. Other major types include high temperature pumps, reverse circulation pumps, pumps for liquid with high melting point, etc.
The major applications of canned motor pump are chemical industry, oil & gas, nuclear energy industry, HVAC Industry The largest consumption area in terms of volume is HVAC industry, which accounted for 49.39 % of world canned motor pumps consumption.

The Global Canned Motor Pumps Market touched xxx million USD with a CAGR xx % from 2018-2022 around the world. In the future, it is predicted to reach xxx million USD in 2023 with a CAGR xx % from 2023 - 2030.
As the report focuses on global Canned Motor Pumps Market, mainly in Europe and Asia Pacific, North America, Middle East and Africa, and South America. This report segmented the Market on the basis of regions, manufacturers, applications, and type.

in addition, this report introduces Market competition situation among the vendors and company profile, besides, Market price analysis and value chain features are covered in this report.

In Market segmentation by manufacturers, the report covers the following companies-

Teikoku
Nikkiso
Kirloskar Brothers
HERMETIC-Pumpen
Dynamic Pumps
OPTIMEX
Shinhoo
Zhejiang Dayuan
Shanghai East Pump
Dlian Huanyou
Chemmp
Shigme
Hayward Tyler
Curtiss-Wright
Harbin Electric Corporation

In Market segmentation by geographical regions, the report has analyzed the following regions-
North America (USA, Canada and Mexico)
Europe (Germany, France, UK, Russia and Italy)
Asia-Pacific (China, Japan, Korea, India and Southeast Asia)
South America (Brazil, Argentina, Columbia etc.)
Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria and South Africa)

In Market segmentation by types covers:

Standard Basic Pumps
High Temperature Pumps
Reverse Circulation Pumps
Pumps for Liquid with High Melting Point
Multistage Pumps
Others
In Market segmentation by applications :

Chemical Industry
Oil & Gas
Nuclear Energy Industry
HVAC Industry
Others

Apart from the drivers, restraints, and opportunities, the report also offers competitive landscape, including various growth strategies adopted by profiled players for establishing significant position in the industry. The segmentation included in the comprehensive report will help respectable manufacturers to set up their processing units in the regions and increase their global presence. This would also benefit the industry and increase the company\'s product portfolio.

The research provides answers to the following key questions:
• What is the estimated growth rate and Market share and size of the Canned Motor Pumps Market for the forecast period 2023 - 2030?
• What are the driving forces in the Canned Motor Pumps Market for the forecast period 2023 - 2030?
• Who are the prominent Market players and how have they gained a competitive edge over other competitors?
• What are the Market trends influencing the progress of the Canned Motor Pumps industry worldwide?
• What are the major challenges and threats restricting the progress of the industry?
• What opportunities does the Market hold for the prominent Market players?
Any special requirements about this report, please let us know and we can provide custom report.

Note – In order to provide more accurate market forecast, all our reports will be updated before delivery by considering the impact of COVID-19.

Research Methodology

The Market Research Update offers technology-driven solutions and its full integration in the research process to be skilled at every step. We use diverse assets to produce the best results for our clients. The success of a research project is completely reliant on the research process adopted by the company. Market Research Update assists its clients to recognize opportunities by examining the global market and offering economic insights. We are proud of our extensive coverage that encompasses the understanding of numerous major industry domains.

Market Research Update provide consistency in our research report, also we provide on the part of the analysis of forecast across a gamut of coverage geographies and coverage. The research teams carry out primary and secondary research to implement and design the data collection procedure. The research team then analyzes data about the latest trends and major issues in reference to each industry and country. This helps to determine the anticipated market-related procedures in the future. The company offers technology-driven solutions and its full incorporation in the research method to be skilled at each step.

The Company's Research Process Has the Following Advantages:

1. Information Procurement

The step comprises the procurement of market-related information or data via different methodologies & sources.

2. Information Investigation

This step comprises the mapping and investigation of all the information procured from the earlier step. It also includes the analysis of data differences observed across numerous data sources.

3. Highly Authentic Source

We offer highly authentic information from numerous sources. To fulfills the client’s requirement.

4. Market Formulation

This step entails the placement of data points at suitable market spaces in an effort to assume possible conclusions. Analyst viewpoint and subject matter specialist based examining the form of market sizing also plays an essential role in this step.

5. Validation & Publishing of Information

Validation is a significant step in the procedure. Validation via an intricately designed procedure assists us to conclude data-points to be used for final calculations.